OSRAM QTP-T / E 1x26, 2x18
Electronic ballast (VSA) for use with the following lamps:
| 1x PHILIPS PL-C 26W (4pin) |
1x OSRAM DULUX D / E 18W |
| 1x PHILIPS PL-T 18W-42W (4p) |
1x OSRAM DULUX T / E 18-42W |
| 1x PHILIPS PL-L 18W-40W |
1x OSRAM DULUX L 18W-40W |
| 2x PHILIPS PL-C 26W (4pin) |
2x OSRAM DULUX D / E 26W |
Electrotechnical data
| Input voltage AC |
198 ... 264 V |
| Nominal voltage |
220 ... 240 V |
| Main frequency |
50 ... 60 Hz |
| DC |
176 ... 264 V |
| Work frequency |
40 ... 50 kHz |
| Maximum number of E-VSAs on a z 10 A (B) |
17
|
| Maximum number of E-VSAs on a z 16 A (B) |
28
|
Light technical data
Dimensions
| Length |
103.0 mm |
| Width |
67.0 mm |
| Height |
31.0 mm |
| Mounting hole distance, length |
94.0 mm |
| Mounting hole distance, width |
57.0 mm |
| Product weight |
148.50 g |
| Wire diameter on output |
0.5 ... 1.5 mm² |
| Wire diameter at input |
0.5 ... 1.5 mm² |
Temperatures and operating conditions
| Ambient temperature range |
-20 ... + 50 ° C |
| Permissible relative humidity |
5 ... 85% |
Lifespan
Additional product data
| Product comment |
Optional cable clamp, see chapter E-VSA fastenings - cable clamp |
Power
| Suitable luminaires with safety class |
I / II |
| Safety shutdown at end of life |
EOL T.2 |
Certificates & standards
| Quality marks |
VDE / ENEC 10 / VDE-EMC / RCM / GOST |
| EEI - Energy label |
A2 BAT |
| Standards |
According to EN 61347-2-3 / According to EN 60929 / According to EN 55015: 2006 + A1: 2007 / According to EN 61000-3-2 / According to EN 61547 |
| Safety class |
III |
| Type of protection |
IP20 |
