Rated wattage | 9.00 W |
---|---|
Nominal wattage | 9.00 W |
Nominal voltage | 220…240 V |
Operating frequency | 50…60 Hz |
Power factor λ | > 0.80 |
Claimed equiv. conventional lamp power | 60 W |
Nominal luminous flux | 806 lm |
---|---|
Rated luminous flux | 806 lm |
Rated color temperature | 2700 K |
Lumen main.fact.at end of nom.life time | 0.70 |
Light color (designation) | Warm White |
Color temperature | 2700 K |
Luminous flux | 806 lm |
Color rendering index Ra | ≥80 |
Standard deviation of color matching | ≤6 sdcm |
Color rendering index Ra | ≥80 |
Warm-up time (60 %) | < 0.50 s |
---|---|
Starting time | < 0.5 s |
Overall length | 112.0 mm |
---|---|
Diameter | 61.5 mm |
Outer bulb | A60 |
Length | 112.0 mm |
Nominal lamp life time | 25000 h |
---|---|
Rated lamp life time | 25000 h |
Number of switching cycles | 100000 |
Lumen maintenance at end of service life | 0.70 |
Base (standard designation) | E27 |
---|---|
Mercury content | 0.0 mg |
Mercury-free | Yes |
Design / version | Frosted |
Show WEEE picto | Yes |
Product remark | All technical parameters apply to the entire lamp/Due to the complex production process for light-emitting diodes, the typical values shown for the technical LED parameters are purely statistical values that do not necessarily match the actual technical parameters of each individual product, which can vary from the typical value/LED lamps contain several electronic components. Under unfavourable conditions these can lead to acoustic noise. In case of resonance even low noise can cause audible effect. Possible factors influencing this are the installation, the design of the lamp holder and the luminaire (acoustic resonance effect) as well as the dimmer or the transformer (harmonics or electronic resonance) |
Dimmable | Yes |
---|
Energy efficiency class | A+ |
---|---|
Energy efficiency class | A+ |
Energy consumption | 9 kWh/1000h |